Lens Protection All

Protect The Glass That Matters

The Defender screws onto your objective or eyepiece and keeps scratches, dust and impacts off the glass that's more painful to replace. Precision CNC machined, with a low-profile bevelled ring that won’t scratch your eye-pro and textured grip so it tightens properly. And stays tight.

Lens options

KEY FEATURES

• Precision CNC-machined lens and anodised ring
• Bevelled edge that’s kind to glasses and eye protection
• Textured ring that locks tight and doesn’t rattle loose
• UV coated and chemical resistant, with a 10-year warranty against yellowing
• Made in Canada

COMPATIBILITY: Fits US mil-spec PVS-14 style lenses, including Noctis, Steele, Photonis Boomslang and RPO 3.0 and 4.0 (RPO 4.0 eyepieces need the spacer option). Fit isn’t guaranteed on Optronics, AGM, Apache, ACT or Spyron lenses.

Note: the eyecup retaining ring can’t be used with the defender

Simple Insurance For Your System

Night vision is expensive, and helmet mounts can and do let go. The NOODL (Night Observation & Operations Device Lanyard) is a simple, low-cost backup that keeps your device tethered to your helmet. It holds it steady while deployed and stops it hitting the ground if it ever comes free.

Unlike Velcro straps that snag on branches and brush, the NOODL attaches directly to a helmet hard point. A Cordura loop goes under your front helmet bolt, and an adjustable shock cord clips to your device. Installation takes a few minutes, and once it’s set up you’ll barely notice it’s there.

What’s new in V2

• Cordura loop by Macabre Solutions for the front helmet bolt
• Lower-profile, easier installation
• Configurable for any helmet attachment point

KEY FEATURES

• Keeps your device secure and steady when deployed
• Adjustable shock cord tension
• Fits most helmets via the front ARC rail bolt
• No Velcro to snag on vegetation
• Everything you need to install is included

IN THE BOX: 1× 12" elastic shock cord, 1× 0.6" black-oxide split ring, 1× 1/8" mini carabiner, 1× Multicam Cordura tether loop (Macabre Solutions), and 2× heat-shrink pieces.

Note: single-point retention. For full tension, use two. Not recommended for airborne or high-angle use.

Flush fit. Full protection

Most lens protectors add bulk to the front of your device. This one doesn’t. The NoxWorks Low Profile Sacrificial Lens sits less than 2 mm (about 1/16") proud of your objective lens, protecting it without getting in the way of covers, caps or accessories.

The impact-resistant polycarbonate lens lets through over 93% of light, so you keep a bright, clear image. Raised ridges around the edge let you screw it straight onto your lens by hand, and take it off just as easily.

KEY FEATURES

• Sits less than 2 mm proud of the objective lens
• Impact-resistant 
• Over 93% light transmission
• Tested against training rounds BBs
• Tool-free fitting and removal

COMPATIBILITY: Fits devices using US mil-spec PVS-14 objective lenses. Tested with Noctis (Fujinon and Qioptiq), Salvo Engineering, Optronics, Photonis Boomslang and RPO 2.0 and 3.0.

Front objective lenses only; not compatible with the curved rear eyepiece.

Standard PVS-14 eyecup used in conjunction with a PVS-14 Eye Cup retaining ring,

Prevents "cats eyes" (light splash around the eyes) visible to others.  

For a monocular: Purchase 1, For a binocular: Purchase 2

*includes the eyecup retaining ring 

Your Tube’s First Line Of Defence

Bright green lasers can damage an image intensifier tube in an instant. Tube damage from light exposure isn’t covered by warranty, so prevention matters. The LIF is a mil-spec filter that screws onto your objective lens and helps protect your device from high-power green lasers and similar wavelengths.

It also works as a very low-profile cover, keeping dust, debris and minor knocks off your objective in everyday use, without adding bulk or getting in the way of focusing.

KEY FEATURES

• Helps protect against high-power green lasers and similar wavelengths
  
• Very low profile; doesn’t interfere with focus travel
• Shields the objective from dust, debris and minor impacts
• Screws straight onto PVS-14 style objective lenses

COMPATIBILITY: Fits devices using US mil-spec PVS-14 objective lenses. Tested with Noctis (Fujinon and Qioptiq), Salvo Engineering, Optronics, Photonis Boomslang and RPO 2.0 and 3.0.

Objective lens only; not for use on the eyepiece. A filter reduces laser risk but can’t guarantee protection from every source. Never point your device at a laser on purpose.

The U.D.P Storage pouch for night vision devices. Sized to fit all current commercial night vision binoculars, and suitable for monoculars with ample room left for accessories.

The main compartment includes mesh dividers to separate your device from batteries, lens cloths and other small items. The double-compartment expandable lid provides additional organised storage and cinches down when not in use.

Features:

• Main compartment: padded with mesh dividers
• Lid compartment: double-compartment with an expandable lid
• Zip and buckle closure for extra security

Standard Day Cap/Pinhole Cover for PVS-14 objectives. Pin Hole covers significantly limits the amount of light to the image intensifier allowing for functions testing in high light areas without damaging the device.