Accessories All

Protect The Glass That Matters

The Defender screws onto your objective or eyepiece and keeps scratches, dust and impacts off the glass that's more painful to replace. Precision CNC machined, with a low-profile bevelled ring that won’t scratch your eye-pro and textured grip so it tightens properly. And stays tight.

Lens options

KEY FEATURES

• Precision CNC-machined lens and anodised ring
• Bevelled edge that’s kind to glasses and eye protection
• Textured ring that locks tight and doesn’t rattle loose
• UV coated and chemical resistant, with a 10-year warranty against yellowing
• Made in Canada

COMPATIBILITY: Fits US mil-spec PVS-14 style lenses, including Noctis, Steele, Photonis Boomslang and RPO 3.0 and 4.0 (RPO 4.0 eyepieces need the spacer option). Fit isn’t guaranteed on Optronics, AGM, Apache, ACT or Spyron lenses.

Note: the eyecup retaining ring can’t be used with the defender

Simple Insurance For Your System

Night vision is expensive, and helmet mounts can and do let go. The NOODL (Night Observation & Operations Device Lanyard) is a simple, low-cost backup that keeps your device tethered to your helmet. It holds it steady while deployed and stops it hitting the ground if it ever comes free.

Unlike Velcro straps that snag on branches and brush, the NOODL attaches directly to a helmet hard point. A Cordura loop goes under your front helmet bolt, and an adjustable shock cord clips to your device. Installation takes a few minutes, and once it’s set up you’ll barely notice it’s there.

What’s new in V2

• Cordura loop by Macabre Solutions for the front helmet bolt
• Lower-profile, easier installation
• Configurable for any helmet attachment point

KEY FEATURES

• Keeps your device secure and steady when deployed
• Adjustable shock cord tension
• Fits most helmets via the front ARC rail bolt
• No Velcro to snag on vegetation
• Everything you need to install is included

IN THE BOX: 1× 12" elastic shock cord, 1× 0.6" black-oxide split ring, 1× 1/8" mini carabiner, 1× Multicam Cordura tether loop (Macabre Solutions), and 2× heat-shrink pieces.

Note: single-point retention. For full tension, use two. Not recommended for airborne or high-angle use.

The Best Way To Mount Your Monocular

A J-arm is what holds your monocular in front of your eye, and when it’s stowed, a bulky arm sticks out, snags and adds unnecesary weight. The Compact Rugged J-Arm is built to stay out of the way. A central articulation joint lets your device fold up close to the helmet, reducing snag risk and the load on your neck, while staying rock steady when deployed.

It’s machined from 7075-T6 aluminium for strength without bulk, works for either eye, and adjusts across a 55–75 mm IPD range to fit most users. It fits the PVS-14, the Nocturn Talon and other monoculars with a standard 1/4-20 mounting screw.

KEY FEATURES

• Stows close to the helmet to reduce snagging and neck strain
• Central articulation joint for a stable, steady hold
• Left or right eye use
• 55–75 mm IPD adjustment
• Machined 7075-T6 aluminium
• Fits any monocular with a standard 1/4-20 PVS-14 interface
• Lifetime warranty

SPECIFICATIONS

For night vision monoculars only.

4-pin Fischer to: 

• 4-pin Fischer: PVS-31A, BNVD-1531, LLUL-21, BNVD-1431, BNVD-931
• 4-pin LEMO (0B): RNVG, RNVG-A, MGA, RPNVG, ANVIS-6, ANVIS-9, Steele Nighthawk, Nocturn Industries Katana Gen 2 and 1 (With LEMO Port)
• 2-pin LEMO (00B): Nocturn Manticore-R, Samurai-R, Chimera, Katana-R, Daisho, Katana Gen 3 Molded

Standard PVS-14 eyecup used in conjunction with a PVS-14 Eye Cup retaining ring,

Prevents "cats eyes" (light splash around the eyes) visible to others.  

For a monocular: Purchase 1, For a binocular: Purchase 2

*includes the eyecup retaining ring 

Two cells. 48 hours. 100 grams.

The Mini Bat Pack gives your Nocturn binocular over 48 hours of runtime from two CR123A cells, enough for several nights without opening the battery compartment. It mounts on the back of your helmet and plugs straight into your device’s LEMO 00B port.

It’s Nocturn’s most compact pack yet, machined from 6061-T6 aluminium and weighing just 100 g, so it adds endurance without adding bulk. If you can’t get CR123As, swap the cap and run it on two AA batteries instead, which are easy to find almost anywhere.

Who it’s for

• Katana, Raptor and Chimera owners who want multi-night runtime
• Anyone who’d rather not change batteries in the cold and dark
• Users who want the option of running on AA batteries (Adapter caps sold seperate)

KEY FEATURES

• 48+ hours of runtime on 2 × CR123A
• Optional AA operation with a cap swap
• Compact, precision-machined 6061-T6 aluminium body
• Only 100 g without batteries
• LEMO 00B 2-pin connection
• Waterproof, with a built-in retention system
• Made in the USA

SPECIFICATIONS

IN THE BOX: Mini Bat Pack. Batteries and AA cap not included.

WARRANTY: Nocturn Industries manufacturer warranty.

The L4 G24 A Battle Hardened Mount

If you’ve seen night vision on a helmet, there’s a good chance it was sitting on a Wilcox. Developed with US and NATO special operations units, the L4 G24 has become the mount many others are compared against. It’s dependable, easy to adjust, and fits a huge range of devices.

Getting your device positioned properly makes a big difference to comfort and image quality, and the G24 makes it easy. Height, fore/aft and tilt can all be fine-tuned, with large controls you can work one-handed, even with gloves on. Once it’s set, it stays set.

The breakaway design is there for your safety: if your device catches on something or takes a heavy knock, the mount releases instead of transferring the force to your neck. When you don’t need your night vision, it flips up and stows close to the helmet.

Who it’s for

• Anyone who wants a proven, widely supported mount they won’t need to replace
• Users running dovetail devices such as the PVS-14 (J-Arm Mounted), Katana, Raptor or Nighthawk
• Those who value adjustability and breakaway safety over the lightest possible weight

KEY FEATURES

• Field-proven design, used by US and NATO special operations forces
• Height, fore/aft and tilt adjustment
• One-handed, glove-friendly controls
• Breakaway design to reduce the risk of neck injury
• Flip-up stow, low profile on the helmet
• Dovetail shoe interface, compatible with a wide range of devices
• Hard-anodised aerospace-grade aluminium

SPECIFICATIONS

IN THE BOX: Wilcox L4 G24 mount.

WARRANTY: Covered by your statutory rights and the NoxWorks Warranty.

Description:

Best paired with an argus APNVG or Nocturn Chimera for 40+Hrs of runtime, or with your binocular system for up to 80Hrs of continuous use. Utilizes 4x CR123 batteries, potted in England for submergibility and weather resistance.

Standard Day Cap/Pinhole Cover for PVS-14 objectives. Pin Hole covers significantly limits the amount of light to the image intensifier allowing for functions testing in high light areas without damaging the device.  

All The Mount, Half The weight

The mount may be the part of your setup you think about least, until it wobbles, slips or adds weight you didn’t need. The ALPHA (Adaptable Lightweight Powered Helmet Arm) has all the adjustment of mounts like the Wilcox G24 and Cadex at a fraction of the weight. 80 g against 180 g+ for a Cadex is a real difference over a long night under night vision.

What sets it apart is choice. The ALPHA is the only mount that can run push-button stow and release or be converted to force-to-overcome, so it works the way you prefer, or the way your kit list demands. A bearing detent paired with the push-button lock holds your device rock steady, with very little of the wobble you get from cheaper mounts.

It’s also designed to feel familiar. The controls sit where you’d expect from legacy mounts, and the large buttons are easy to find and press with gloves on. A long 41 mm carriage throw means you can position your device properly, even over glasses, eye protection or a respirator.

Who it’s for

• Anyone looking to cut weight from their helmet setup
• Users moving on from a G24 or Cadex who want the same adjustment in a lighter package
• Teams that require push-button or force-to-overcome operation

KEY FEATURES

• 80 g: one of the lightest fully adjustable mounts available
• Switchable between push-button and force-to-overcome operation
• Bearing detent and push-button lock for a solid, wobble-free hold
• 41 mm carriage throw for eyewear and respirator clearance
• Large, glove-friendly controls in familiar positions
• Breakaway design
• Adjustable rubber pads for a secure fit on any shroud
• CNC-machined 7075-T6 aluminium and 17-4 PH stainless steel
• Lifetime repair or replacement warranty

SPECIFICATIONS

IN THE BOX: ALPHA mount and optional rear rubber pads. Helmet shroud not included.

WARRANTY: Nocturn Industries lifetime repair or replacement warranty.